TONALITY Adaptivsystem (ADS)
The TONALITY adaptive system (ADS) can be attached to a horizontal or vertical primary substructure. The TONALITY ADS vertical profiles are available in system depths of 46 mm, 56 mm and 66 mm. TONALITY adaptive vertical profiles accept either joint profiles with closed, fine or open joints or end profiles without joints. Left and right-hand external corner profiles are available for mitred corners. The TONALITY 30 x 30 mm external corner profile is used for open corners with profiles of 56 and 66 mm system depths. Reveal and lintel profiles are available for fixing tiles in window and door areas.
Adaptive System (ADS) on horizontal substructure
Adaptive System (ADS) on vertical substructure
The ADS-Siding system completes the adaptive system, for designing ceramic facades with the appearance of lap siding.
A classic brick wall appearance with offset joints can be created using the ADS-T-Line system.
TONALITY Base Clinch Rail System (BAS)
The TONALITY base clinch rail system (BAS) can be fixed to a vertical primary substructure of wall brackets and T-sections. Joint and support profiles are already firmly connected to each other in the factory. Different joint profiles enable additional design possibilities. Available as external corner solutions are the TONALITY 90° external corner profile for mitred corners as well as the TONALITY 30 x 30 mm external corner profile for open corners. Reveal and lintel profiles are available for fixation of tiles in window and door areas. The system components are complemented by the universally applicable BAS Flex holder.