Sản phẩm

Sun Protection Facade

Màu sắc:

Mã sản phẩm

110

Nhãn hiệu

Đơn vị

Độ dày (mm)

Kích thước (mm)

Xuất xứ

Liên hệ

Chi tiết sản phẩm

Seeing and not being seen

Privacy and sun protection cannot be integrated into a facade any more naturally. It is all the same whether you are using Lamella, Baguette or Square elements: TONALITY ® privacy and sun protection elements blend into the overall facade design as a solitary design element harmoniously with metal, ceramic, glass or plaster. They can be installed either horizontally or vertically. Thus they provide discretion on the one hand as well as a pleasant indoor climate in the building through their active sun protection

Forfatterhuset Kindergarten, Copenhagen, DK
Products: TONALITY^® Square, special colours

Data Centre Office, Toronto, Ontario, CA

Products: TONALITY^® NATUR, Toscana red

Standard format

The individual ceramic elements are available up to a maximum single length of 1,600 mm. Longer elements can be made by assembling shorter elements. Other shapes are also possible according to customer requirements.

Baguette

Lamelle

Square

Download file

Type: Size: Download: 0

Tonality Company

Download file

TONALITY Adaptivsystem (ADS)

The TONALITY adaptive system (ADS) can be attached to a horizontal or vertical primary substructure. The TONALITY ADS vertical profiles are available in system depths of 46 mm, 56 mm and 66 mm. TONALITY adaptive vertical profiles accept either joint profiles with closed, fine or open joints or end profiles without joints. Left and right-hand external corner profiles are available for mitred corners. The TONALITY 30 x 30 mm external corner profile is used for open corners with profiles of 56 and 66 mm system depths. Reveal and lintel profiles are available for fixing tiles in window and door areas.

Adaptive System (ADS) on horizontal substructure

Adaptive System (ADS) on vertical substructure

ADS-Siding

The ADS-Siding system completes the adaptive system, for designing ceramic facades with the appearance of lap siding.

ADS-T-Line

A classic brick wall appearance with offset joints can be created using the ADS-T-Line system.

TONALITY Base Clinch Rail System (BAS)

The TONALITY base clinch rail system (BAS) can be fixed to a vertical primary substructure of wall brackets and T-sections. Joint and support profiles are already firmly connected to each other in the factory. Different joint profiles enable additional design possibilities. Available as external corner solutions are the TONALITY 90° external corner profile for mitred corners as well as the TONALITY 30 x 30 mm external corner profile for open corners. Reveal and lintel profiles are available for fixation of tiles in window and door areas. The system components are complemented by the universally applicable BAS Flex holder.